7228.30.2000
美国Of ball-bearing steel
原文（English）：Of ball-bearing steel
税率信息
Column 1 General
Free
Special（FTA 优惠）
无数据
Column 2
29%
计量单位
第一法定单位
--
第二法定单位
--
同品目相关编码
| HS 编码 | 产品名称 |
|---|---|
| 7228.10.0010 | Not cold-formed |
| 7228.10.0030 | With a maximum cross-sectional dimension of less than 18 mm |
| 7228.10.0060 | With a maximum cross-sectional dimension of 18 mm or more |
| 7228.20.1000 | Not cold-formed |
| 7228.20.5000 | Cold-formed |
| 7228.30.4000 | Of chipper knife steel, not cold-formed |
| 7228.30.6000 | Other |
| 7228.30.8005 | Of high-nickel alloy steel |
| 7228.30.8010 | Concrete reinforcing bars and rods |
| 7228.30.8015 | With a diameter or cross section measuring less than 76 mm |
| 7228.30.8041 | With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm |
| 7228.30.8045 | With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm |
| 7228.30.8070 | With a diameter or cross section exceeding 228 mm |
| 7228.40.0000 | Other bars and rods, not further worked than forged |
| 7228.50.1010 | Of ball-bearing steel |
| 7228.50.1020 | Of round or rectangular cross section with surfaces ground, milled or polished |
| 7228.50.1040 | Other |
| 7228.50.1060 | Of round or rectangular cross section with surfaces ground, milled or polished |
| 7228.50.1080 | Other |
| 7228.50.5005 | Of high-nickel alloy steel |
| 7228.50.5015 | With a diameter or cross section measuring less than 76 mm |
| 7228.50.5040 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm |
| 7228.50.5070 | With a diameter or cross section exceeding 228 mm |
| 7228.60.1030 | Of ball-bearing steel |
| 7228.60.1060 | Other |
| 7228.60.6000 | Not cold-formed |
| 7228.60.8000 | Cold-formed |
| 7228.70.3010 | U, I, H and T sections |
| 7228.70.3020 | Angles |
| 7228.70.3041 | Other |
| 7228.70.3060 | Angles |
| 7228.70.3081 | Other |
| 7228.70.6000 | Other |
| 7228.80.0000 | Hollow drill bars and rods |
需要进出口报关协助？
零搜科技提供德国工业品原厂直采与进出口全流程服务。
数据来源于 USITC HTSUS 公开数据，仅供参考，实际以 USITC 与 CBP 最新发布为准。