VCXG-15C.I

基本信息
型号: VCXG-15C.I
订货号: 11194702
Industriekameras / CX-Serie
- ·1440×1080像素
- ·Sony IMX273
- ·1/2.9″ CMOS
- ·79帧/秒
- ·Gigabit Ethernet
Sensor Daten
- Sensor:
- Sony IMX273 Gen2
- Mono/Farbe:
- Farbe
- Sensor Typ:
- 1/2.9″ CMOS
- Shutter Typ:
- Global shutter
- Auflösung:
- 1440 × 1080 px
- Pixelgrösse:
- 3,45 × 3,45 µm
- Belichtungszeit:
- 0,001 … 60000 ms
Datenqualität (EMVA 1288 typical)
- Dark Noise:
- 2,08 e-
- Saturation Capacity:
- 9279 e-
- Dynamikbereich:
- 70,6 dB
- Signal-Rausch-Verhältnis:
- 39,7 dB
- Quanteneffizienz:
- 45,3 % @ 465 nm
- 57,7 % @ 536 nm
- 53,4 % @ 631 nm
Bildaufnahmeformate
- Bildformate, Bildrate Schnittstelle max.:
- Full Frame, 1440 × 1080 px, max. 79 fps
- Binning 2×2, 720 × 540 px, max. 120 fps
- Binning 2×1, 720 × 1080 px, max. 120 fps
- Binning 1×2, 720 × 540 px, max. 120 fps
- Bildformate, Bildrate Bildaufnahme max. (Burst Mode):
- Full Frame, 1440 × 1080 px, max. 121 fps
- Pixelformate:
- BayerRG8
- BayerRG10
- BayerRG12
- BayerRG12 Packed
- Mono8
- Mono10
- Mono12
- Mono12 Packed
- RGB8
- BGR8
Bildmanipulation
- Analoge Steuerung:
- Gain (0 … 8 dB)
- Offset (0 … 63 LSB 10 Bit)
- Farbmodelle:
- Mono
- Raw Bayer
- RGB
- BGR
Kamerafunktionen
- Basisfunktionen:
- Exposure
- Gain / Color Gain
- Trigger / Exposure Active (Flash)
- Binning 2x2
- Partial Scan
- Offset
- Free Running Mode (Live Bild)
- Auto-Funktionen:
- Exposure Auto
- Gain Auto
- White Balance Auto
- Color Transformation Auto
- Bildvorverarbeitung:
- Image Flipping (X/Y)
- Color Processing (RGB, BGR, Mono)
- Color Enhancement (mit ColorTransformationMatrix)
- LUT / Gamma
- Bildaufnahme / Schnittstelle:
- Burst Mode
- Adjustable Framerate
- Short Exposure Time Enable
- Device Link Throughput Limit
- Interner Bildspeicher
- Synchronisation:
- Free running
- Trigger
- Trigger Quellen:
- Hardware
- Software
- ActionCommand
- Trigger Delay:
- 0 … 2 s, Nachverfolgung und Speicherung von bis zu 256 Trigger Signalen
- Prozesssynchronisation:
- Events
- Timer
- Trigger Delay
- Debouncer
- Counter
- Sequencer
- Trigger via Action CMD (GigE)
- Additional Output Modes (e.g. Trigger Ready)
- PWM (PWM Duration / PWM Duty Cycle)
- 4 Power-Ausgänge mit bis zu 120 W (max. 48 V / 2,5 A)
- Selectable Output format (e.g. Tri State, Push Pull)
- Chunk data inside transferred image
- Encoder support via Counter End trigger source
- Weitere Funktionen:
- User Set
- Integrated temperature sensor
- Readable additional information (e.g. sensor information)
- Save Custom Data
- Interner Bildspeicher:
- 36 MB
- 8 Bilder (Trigger Mode)
- 1 Bild (Free Running Mode)
Schnittstellen
Mechanische Daten
Elektrische Daten
Nichtflüchtiger Speicher
Umgebungsbedingungen
Digitale Ein- und Ausgänge
Konformität
业务合作
还没有人评价,快来抢沙发~



