7306.30.5041
USAWith an outside diameter not exceeding 50.8 mm
Original (Englisch)：With an outside diameter not exceeding 50.8 mm
Zollinformationen
Column 1 General
Free
Special (FTA-Präferenz)
Keine Daten
Column 2
Keine Daten
Maßeinheiten
Primäre Einheit
--
Sekundäre Einheit
--
Verwandte Codes (gleiche Position)
| Zolltarifnummer | Produktname |
|---|---|
| 7306.11.0010 | With an outside diameter not exceeding 114.3 mm |
| 7306.11.0050 | With an outside diameter exceeding 114.3 mm |
| 7306.19.1010 | With an outside diameter not exceeding 114.3 mm |
| 7306.19.1050 | With an outside diameter exceeding 114.3 mm |
| 7306.19.5110 | With an outside diameter not exceeding 114.3 mm |
| 7306.19.5150 | With an outside diameter exceeding 114.3 mm |
| 7306.21.3000 | Threaded or coupled |
| 7306.21.4000 | Other |
| 7306.21.8010 | Imported with coupling |
| 7306.21.8050 | Other |
| 7306.29.1030 | Imported with coupling |
| 7306.29.1090 | Other |
| 7306.29.2000 | Other |
| 7306.29.3100 | Threaded or coupled |
| 7306.29.4100 | Other |
| 7306.29.6010 | Imported with coupling |
| 7306.29.6050 | Other |
| 7306.29.8110 | Imported with coupling |
| 7306.29.8150 | Other |
| 7306.30.1010 | Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit |
| 7306.30.1090 | Other |
| 7306.30.3000 | Tapered steel pipes and tubes principally used as parts of illuminating articles |
| 7306.30.5010 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn |
| 7306.30.5015 | Other, cold-drawn |
| 7306.30.5020 | Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm |
| 7306.30.5026 | With an outside diameter not exceeding 50.8 mm |
| 7306.30.5027 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm |
| 7306.30.5028 | Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit |
| 7306.30.5031 | With an outside diameter not exceeding 50.8 mm |
| 7306.30.5033 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm |
| 7306.30.5035 | Tube and pipe hollows for redrawing |
| 7306.30.5043 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm |
| 7306.30.5056 | With an outside diameter not exceeding 50.8 mm |
| 7306.30.5057 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm |
| 7306.30.5085 | Galvanized |
| 7306.30.5090 | Other |
| 7306.40.1010 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum |
| 7306.40.1015 | Other |
| 7306.40.1090 | Other |
| 7306.40.5005 | Of high-nickel alloy steel |
| 7306.40.5015 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn |
| 7306.40.5040 | Containing more than 0.5 percent but less than 24 percent by weight of nickel |
| 7306.40.5042 | Containing less than 15 percent by weight of chromium |
| 7306.40.5044 | Other |
| 7306.40.5062 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum |
| 7306.40.5064 | Other |
| 7306.40.5080 | Other |
| 7306.40.5085 | Containing more than 0.5 percent but less than 24 percent by weight of nickel |
| 7306.40.5090 | Other |
| 7306.50.1000 | Having a wall thickness of less than 1.65 mm |
Benötigen Sie Import-/Exporthilfe?
ZeroSearch bietet Beschaffung deutscher Industrieprodukte und vollständige Import-/Exportdienstleistungen.
Daten aus offenen USITC-HTSUS-Daten, nur zur Referenz. Maßgeblich sind die jeweils aktuellen Veröffentlichungen von USITC und CBP.